南美超级胎牛血清999尝鲜特惠
转染试剂低至5折
基质胶阶梯特惠
积分商城,好礼送不停
南美超级胎牛血清999尝鲜特惠
转染试剂低至5折
基质胶阶梯特惠
积分商城,好礼送不停

动态支撑浴桶光聚合生物打印技术研究

Vat photopolymerization bioprinting with a dynamic support bath

Yang Li, Qijiang Mao, Kailei Xu, Huayong Yang, Yong Huang, Jun Yin

Journal:Additive Manufacturing

IF:11

DOI:10.1016/j.addma.2023.103533

PMID:

Published:2023-04-01

research field:生物制造生物医学工程呼吸生物学材料科学

Abstract

Support bath-assisted additive manufacturing has been extensively employed in constructing 3D complex soft biomaterials by extrusion- or inkjet-based printing. However, the conventional support bath (i.e., slurry of gelatin microparticles used in freeform reversible embedding of suspended hydrogels and nanoclay) can only provide static in-situ support to the deposited constructs, which is not feasible for vat photopolymerization printing since the printed constructs are mobile during the printing process. A dynamic support bath assisted vat photopolymerization printing method using yield stress fluid (YSF) is proposed in this study, which enables the dynamic accompanying supporting for the printing structures. As the moving platform rises continually, the YSF bioink was elevated with the cured construct near the curing region and remaining in a solid-like state to provide support against gravity and surface tension. While the YSF bioink was in a liquid-like state, due to the atmospheric pressure difference during the rising of moving platform, the YSF bioink can flow to fill up the vacuum and ensure continuous forming. Thus, this printing method achieved the vat photopolymerization printing of extremely soft cell-laden bioinks (Young’s modulus of 4.3 KPa) into 3D complex constructs with excellent biological functionality.

本文使用的Yeasen产品

购物车
客服
转染试用